HSMDEN=DISABLED, TMRCAP=NOT_SET, ALM1I=NOT_SET, OSCFI=NOT_SET, TMRSET=NOT_SET, LRDYF=NOT_SET, ALM0I=NOT_SET, CLKVF=NOT_SET, ALM2I=NOT_SET
RTC Control
| ALM0I | Alarm 0 Interrupt Flag. 0 (NOT_SET): Alarm 0 event has not occurred. 1 (SET): Alarm 0 event occurred. |
| ALM1I | Alarm 1 Interrupt Flag. 0 (NOT_SET): Alarm 1 event has not occurred. 1 (SET): Alarm 1 event occurred. |
| ALM2I | Alarm 2 Interrupt Flag. 0 (NOT_SET): Alarm 2 event has not occurred. 1 (SET): Alarm 2 event occurred. |
| TMRCAP | RTC Timer Capture. 0 (NOT_SET): RTC timer capture operation is complete. 1 (SET): Start the RTC timer capture. |
| TMRSET | RTC Timer Set. 0 (NOT_SET): RTC timer set operation is complete. 1 (SET): Start the RTC timer set. |
| CLKVF | RTC External Oscillator Valid Flag. 0 (NOT_SET): External oscillator is not valid. 1 (SET): External oscillator is valid. |
| OSCFI | RTC Oscillator Fail Interrupt Flag. 0 (NOT_SET): Oscillator is running. 1 (SET): Oscillator has failed. |
| HSMDEN | RTC High Speed Mode Enable. 0 (DISABLED): Disable high speed mode. (AHBCLK < 4x RTCnTCLK) 1 (ENABLED): Enable high speed mode. (AHBCLK >= 4x RTCnTCLK) |
| LRDYF | RTC Load Capacitance Ready Flag. 0 (NOT_SET): The load capacitance is currently stepping. 1 (SET): The load capacitance has reached its programmed value. |